View LQ043T3DX02_456523.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
43T3DX02
Dec. 28 M-05042
www..com
LCM- 05042 Page 2 of 23
www..com
RECORDS OF REVISION
LQ043T3DX02 Date
2005.12.28
MODEL No SPEC No.
LCM-05027
NO.
PAGE
-
SUMMARY
-
NOTE
1st Issue
LCM- 05042 Page 3 of 23
This specification www..com
includes information and/or data that are subjected to Sharp's copyrights. Please see to it that this specification be handled with utmost care. No part may be copied without our permission.
The examples of applications given herein are only intended for explaining typical applications of our product. Moreover, presenting this specification does not mean giving our warranty or licensing any industrial property rights or other rights. Besides, Sharp will not hold itself responsible for any issue that may arise with a third party on industrial property rights from or with regard to use of the product.
This product has been developed and manufactured for applications to mobile instrument products.
If this product is to be used for any other systems that require high reliability and safety in performance, accuracy, etc, such as transportation systems (aircrafts, trains, mobiles), security or fire-prevention systems, any other safety devices, etc, you are requested to allow for safety design of the entire system or device, such as fail-safe and redundancy design so as to maintain and assure its reliability and safety.
Do not apply this product for aerospace systems, mainline communication systems, nuclear power control systems or medical equipment involved in life support that require high reliability and safety, as it is not intended for such use or application.
Sharp shall not be liable for or indemnify any loss or damage that may arise from use or application of the product without observing our cautions, conditions, etc. as stated in this technical document.
If there is anything unclear to you regarding the product, please contact our staff in charge of sales.
LCM- 05042 Page 4 of 23
www..com
Contents 1. Applicable Scope ************************************************************************************ 5
2. General Description ******************************************************************************** 5
3. Mechanical (Physical) Specifications ****************************************************** 5
4. Input Terminal Names and Functions ***************************************************** 6
5. Absolute Maximum Ratings********************************************************************* 7
6. Electrical Characteristics************************************************************************* 8
7.Timing Characteristics of Input Signal***************************************************** 12
8.Input Signal and Display Color **************************************************************** 15
9. Optical Characteristics *************************************************************************** 16
10. Handling of Modules **************************************************************************** 18
11. Delivery form ************************************************************************************** 19
12. Reliability Test Conditions ******************************************************************** 20
13. Display Grade ************************************************************************************** 20
14. Lot Number Marking***************************************************************************** 21
15. Others ************************************************************************************************** 21
16. Outline dimension ******************************************************************************** 22
17.Packing style ***************************************************************************************** 23
LCM- 05042 Page 5 of 23 1. Applicable Scope This specification www..com is applicable to TFT-LCD Module "LQ043T3DX02" only.
2. General Description This module is a color active matrix LCD module incorporating amorphous silicon TFT(Thin Film Transistor) It is composed of a color TFT-LCD panel, driver ICs, Input FPC and a back light unit. Graphics and texts can be displayed on a 480 (8bit 3 272 dots panel with about 16million colors by supplying 24bit data signals
RGB), Four timing signals, logic (typ. +2.5V), analog (typ. +5V) supply voltages for TFT-LCD panel
driving and supply voltage for back light.
3. Mechanical (Physical) Specifications Item Screen size Active area Pixel format Pixel pitch Pixel configuration Display mode Unit outline dimensions Mass Polarizer Surface treatment Specifications 10.9 (4.3" type) diagonal 95.04(H) 480 53.856(V) 272 Unit cm mm pixel
1Pixel =R+G+B dots 0.198(H) 0.198(V) mm
R,G,B vertical stripes Normally black 105.5(W) 67.2(H) 50 Clear hard coat 3.95(D) mm g
The above-mentioned table indicates module sizes without some projections and FPC.
LCM- 05042 Page 6 of 23 4. Input Terminal Names and Functions 4-1. TFT LCD www..comPanel Driving (Reference Connector : Hirose Electric CO., LTD.Product No.: FH12A-40S-0.5SH(55) Top contact type)
The Bottom contact type can be selected according to side of mounted connector and terminal side of FPC.
Terminal No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Terminal name GND GND VCC VCC R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 GND CK DISP Hsync Vsync NC AVDD AVDD NC TEST1 TEST2 TEST3
Function GND(0V) GND(0V) +2.5V power source +2.5V power source RED Data Signal (LSB) RED Data Signal RED Data Signal RED Data Signal RED Data Signal RED Data Signal RED Data Signal RED Data Signal (MSB) GREEN Data Signal (LSB) GREEN Data Signal GREEN Data Signal GREEN Data Signal GREEN Data Signal GREEN Data Signal GREEN Data Signal GREEN Data Signal (MSB) BLUE Data Signal (LSB) BLUE Data Signal BLUE Data Signal BLUE Data Signal BLUE Data Signal BLUE Data Signal BLUE Data Signal BLUE Data Signal (MSB) GND(0V) Clock signal to sample each date Display ON/OFF Signal Horizontal synchronizing signal Vertical synchronizing signal NC +5V Analog power source +5V Analog power source NC TEST1 TEST2 TEST3
Remarks
Note 1
Note 1 Note 2 Note 3 Note 3
Note 1 Note 2 Note 3
They have been open within FPC. Please be sure to set 38 pins (TEST1) to open. Please be sure to connect 39 pin (TEST2) ,40 pin (TEST3) with GND.
LCM- 05042 Page 7 of 23 4-2. Backlight 0.5mmP 4Pin www..comFPC (Reference Connector :Kyocera Elco Corporation
Terminal No. 1 2 3 4 Signal
Product No. : 6298 Bottom contact type)
The Bottom contact type can be selected according to side of mounted connector and terminal side of FPC.
Function LED Power Source Input terminal (Cathode side) No Connection No Connection LED Power Source Input terminal (Anode side)
VLEDNC NC VLED+
5. Absolute Maximum Ratings Item Input voltage 2.5 V Power supply voltage 5 V Power supply voltage Temperature for storage Temperature for operation LED Input electric current LED electricity consumption Note 1 Note 2 CK,R0 R7,G0 Symbol VI VCC AVDD Tstg Topa ILED PLED Ta=25 Ta=25 Conditions Ta=25 Ta=25 Ta=25 Rated value -0.3 0 0 -25 -10 25 100 VCC+0.3 +4.5 +6.0 +60 +50 mA mW Remarks Note 1
Unit V V V
Note 2 Note 3 Note 4 Note 4
G7,B0 B7,Hsync,Vsync,DISP ) (Ta 40 ) See to it that no dew will be condensed.
Humidity : 80%RHMax. (Ta 40
Maximum bulb temperature under 39 Note 3 Panel surface temperature prescribes.
(Reliability is examined at ambient temperature of 50 .) Note 4 Power consumption of one LED (Ta=25 ) (use LED NESW008B 7pieces)
Ambient temperature and the maximum input are fulfilling the following operating conditions.
Forward current IF (mA) Ambient temperature Ta ( )
Ambient temperature and the maximum input
LCM- 05042 Page 8 of 23 6. Electrical Characteristics 6-1. TFT LCD www..comPanel Item 2.5V power supply 5V power supply DC voltage DC Current DC voltage DC Current Driving Symbol VCC ICC AVDD IAVDD VRFVCC Permissive Input ripple voltage VRFAVDD Input voltage (Low) Input voltage (High) Input current (Low) VIL VIH IOL IOH 0.8 V
CC
Ta = 25 Min. +2.3 +4.8 Typ. +2.5 1.2 +5.0 10 Max. +3.3 3 +5.2 18 100 100 0.2 V
CC
Unit V mA V mA
Remarks Note 1 Note 3 Note 1 Note 3
mVp-p Vcc=+2.5V mVp-p Vcc=+5.0V V Note 4 V VI =0V Note 4 VI =2.5V Note 4
4.0
A
Input current (High)
4.0
A
The rush current will flows when power supply is turned on, so please design the power supply circuit referring to Note 5
(The rush current changes according to the condition of the supply voltage value, rising time and so on.)
LCM- 05042 Page 9 of 23 Note 1 Sequences of supply voltage and signals
www..com
2.3V VCC 0.3V t1_C 4.8V 0.3V t1_D t2 Signal required domain t3 max.10frame Black mask Display usual LCD display Black mask display OFF processing 9 frame Min.10frame t5 4.8V t4 0.3V 2.3V 0.3V
AVDD CK Hsync,Vsync DATA DISP
Note 2
LCD display LED B/L ON/OFF Timing (example) ON
ON processing 9 frame
OFF
Please do not supply AVDD before VCC. It discharges and boost up voltage for TFT module on the basis of a DISP-signal
It drives Max-10 flames (about 0.2seconds) from change of DISP-signals by reasons that It takes time for 9 flames while each processing operation. Therefore, the display start is delayed for 10 flames and Ten or more frames needs to be voltage maintained at the time of a display end. when VCC voltage is supplied
It is not problem to set up DISP=L , AVDD=GND Please don't set in reason that various signals to Hi-Z
when VCC-voltage is supplied
those signals are CMOS input.
Don't change DISP signal into the state of H level When AVDD voltage is in the state of GND. The ON/OFF timing of LED Back Light is an example. MIN 0 0.5 50 0.5 0 0 TYP MAX 10 10 unit ms ms ms ms ms ms Remarks
t1_C t1_D t2 t3 t4 t5
Note 2
Dip Conditions for supply voltage
td
10ms
LCM- 05042 Page 10 of 23 Note 2 While www..com "VSYNC" is "Low", don't change "DISP" signal "Low" to "High".
Allowed Timing
Prohibited Timing
2x HSYNC period right before "VSYNC" changes from "Low" to "High" .
Note 3 Typical current situation: 256-gray-bar pattern
VCC=2.5V AVDD=5.0V
Note 4
CK, R0
R7, G0
G7,B0
B7,Hsync,Vsync,DISP
LCM- 05042 Page 11 of 23 Note 5 An www..com example of rush current measurement
VCC
Icc
LCD Module Side
Measurement conditions
0.1uF
Power supply voltage Disp signal Other input signals Measurement system
VCC OFF GND
2.5V
AVDD ON
5.0V
Measurement part IAVDD
AVDD
4.7uF
refer to right Fig. refer to following Fig.
rush current measurement timing
2.2uF
Measurement 1 2.3V
VCC
0.3V
Measurement 2 4.8V
Measurement 3
Rising Time
AVDD
0.01ms
0.3V Rising Time
Vsync
0.5ms
DISP
Measurement Example
Measurement 1 Y 20mA/Div., 2V/Div., X VCC 2.5V Rising Time Icc 0.01ms Peak Current ICC about 100mA
0.003ms/Div.
Measurement 2 Y 20mA/Div., 2V/Div., X AVDD:5.0V
Measurement 3 0.08ms/Div. Y 50mA/Div., 5V/Div., X
4ms/Div.
Rising Time 0.5ms
Vsync
Disp
IAVDD IAVDD Peak Current about 80mA IAVDD
Peak Current about 100mA
These rush current won't flow stationary, these will flow at the timing shown in Measurement 3.
LCM- 05042 Page 12 of 23 6-2. Back light driving The back light www..com system [NESW008B] Parameter Rated Voltage Rated Current has seven LEDs
Symbol
Min.
Typ. 18
VBL IL
Max. 29.4 20
Unit V mA
Remark Ta=25
7.Timing characteristics of input signals An input signal timing waveform is shown in Fig. 2. 7-1 Timing characteristics Parameter Frequency Clock Duty ratio Set up time Data Hold time Period Pulse width
Horizontal synchronizing
Symbol 1/Tc Th/T Tds Tdh TH THp THd THb THf TV TVp TVd TVb TVf
Min. 7.83 40 25 25
Typ. 9.00 50
Max. 9.26 60
525 41 480 2 2 286 10 272 2 2
Unit MHz % ns ns Clock Clock Clock Clock Clock Line Line Line Line Line
Remark
Horizontal period Back porch Front porch
Period Pulse width Vertical period Back porch Front porch
Vertical synchronizing
Note
In case of using the slow frequency, the deterioration of display, flicker etc may occur. The timing characteristics are basically fixed as above.
Non vertical date domain
Non vertical date domain
www..com
7-2
Timing details
LCM- 05042 Page 13 of 23
Fig
Input signal timing
LCM- 05042 Page 14 of 23 7-3 Input Data Signals and Display Position on the screen
www..com
Display position of input data (H
V
FPC
Please refer to 4-1 (P6) about Pin arrangement. 1 VLED4 VLED 1 40
Please refer to 4-2 about LED side Pin arrangement.
LCM- 05042 Page 15 of 23 8. Input Signals, Basic Display Colors and Gray Scale of Each Color
www..com
Colors &
Date signal
Gray Scale
Gray Scale
R0
LSB
R1
R2
R3
R4
R5
R6
R7
G0
G1
G2
G3
G4
G5
G6
G7
B0
B1
B2
B3
B4
B5
B6
B7
MSB
MSB LSB
MSB LSB
Black Blue Green Cyan Red Magenta Yellow White Black Gray Scale of Red Gray Scale of Green Gray Scale Blue
GS0 GS1
0 0 0 0 1 1 1 1 0 1 0
0 0 0 0 1 1 1 1 0 0 1
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
0 1 0 1 0 1 0 1 0 0 0
Basic Color
Darker
GS2
Brighter GS253 1
GS254 0 1 0 0 0
0 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 0 0 0 1 0
0 0 0 0 0 1
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Red Black
GS255 GS0 GS1
Darker
GS2
Brighter GS253 0
GS254 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
1 0 1 0 0 0
0 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 0 0 0 1 0
0 0 0 0 0 1
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Green GS255 0 Black
GS0 GS1 0 0 0
Darker
GS2
Brighter GS253 0
GS254 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
1 0 1
0 1 1
1 1 1
1 1 1
1 1 1
1 1 1
1 1 1
1 1 1
Blue
GS255
0
Low level voltage
1
High level voltage
Each basic color can be displayed in 256 gray scales from 8 bit data signals. According to the combination of 24 bit data signals, the 16-million-color display can be achieved on the screen.
LCM- 05042 Page 16 of 23 9. Optical Characteristics Module characteristics www..com Ta = 25 Parameter
Viewing angle
Horizontal Vertical
, VCC = +2.5V, AVDD = 5.0V Unit Deg. Deg. Deg.
Note2,4 Note1,4
Symbol 21, 22 11 12 CR
r d
Condition
CR 10
Min.
Typ. 80 80 80
Max.
Remark
range
Contrast ratio Response Time Rise Decay
=0 =0
100
400 30 30 45 45 0.346 ms
Note3,4
ms
Note4
Chromaticity of White
Luminance of white
x y XL1
0.246 0.293
0.296 0.343 165
0.393 cd/m2
ILED=18mA
Note4
The optical characteristics measurements are operated under a stable luminescence(I and a dark condition. (refer to Fig.3)
LED
= 18mA)
Note 1
www..com
Definitions of viewing angle range
LCM- 05042 Page 17 of 23
Normal line
6 o'clock
Note 2
Definition of contrast ratio The contrast ratio is defined as the following Luminance (brightness) with all pixels white Luminance (brightness) with all pixels black
Contrast ratio(CR)
Note 3
Definition of response time The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white"
white ( Relative value ) Photo detector output Black Time Black Note 4 This shall be measured at center of the screen.
white
LCM- 05042 Page 18 of 23 10. Handling of modules 10-1 Inserting www..com the FPC into its connector and pulling it out.
Be sure to turn off the power supply and the signals when inserting or disconnecting the cable. Please insert for too much stress not to join FPC in the case of insertion of FPC.
10-2 About handling of FPC The bending radius of the FPC should be more than 1.4mm, and it should be bent evenly. Do not dangle the LCD module by holding the FPC, or do not give any stress to it.
10-3 Mounting of the module The module should be held on to the plain surface. Do not give any warping or twisting stress to the module. Please consider that GND can ground a modular metal portion etc. so that static electricity is not charged to a module.
10-4 Cautions in assembly / Handling pre cautions. As the polarizer can be easily scratched, be most careful in handling it. Work environments in assembly. Working under the following environments is desirable: a) Implement more than 1M conductive treatment ( by placing a conductive mat or applying
Conductive paint ) on the floor or tiles. b) No dusts come in to the working room. Place an adhesive, anti-dust mat at the entrance of the room. c) Humidity of 50 70 and temperature of 15 27 are desirable.
d) All workers wear conductive shoes, conductive clothes, conductive fingerstalls and grounding belts without fail. e) Use a blower for electrostatic removal. Set it in a direction slightly tilt downward so that each Module can be well subjected to its wind. Set the blower at an optimum distance between the blower and the module. How the remove dust on the polarizer a) Blow out dust by the use of an N2 blower with antistatic measures taken. Use of an ionized air Gun is recommendable. b) When the panel surface is soiled, wipe it with soft cloth. In the case of the module's metal part (shield case) is stained, wipe it with a piece of dry, soft cloth. If rather difficult, give a breath on the metal part to clean better. If a water dropped, etc. remains stuck on the polarizer for a long time, it is apt to get discolored or cause stains. Wipe it immediately. As a glass substrate is used for the TFT-LCD panel, if it is dropped on the floor or hit by something hard, it may be broken or chipped off. Since CMOS LSI is used in this module, take care of static electricity and take the human earth into consideration when handling.
LCM- 05042 Page 19 of 23 10-5 Others Regarding www..com storage of LCD modules, avoid storing them at direct sunlight-situation.
You are requested to store under the following conditions: (Environmental conditions of temperature/humidity for storage) (1) Temperature: 0 40
(2) Relative humidity : 95% or less As average values of environments (temperature and humidity) for storing, use the following control guidelines: Summer season: 20 35 , 85 or less Winter season: 5 15 , 85 or less
If stored under the conditions of 40 than 240 hours.
and 95% RH, cumulative time of storage must be less
If stored at temperatures below the rated values, the inner liquid crystal may freeze, causing cell destruction. At temperatures exceeding the rated values for storage, the liquid crystal may become isotropic liquid, making it no longer possible to come back to its original state in some cases. If the LCD is broken, do not drink liquid crystal in the mouth. If the liquid crystal adheres to a hand or foot or to clothes, immediately cleanse it with soap. If a water drop or dust adheres to the polarizer, it is apt to cause deterioration. Wipe it immediately. Be sure to observe other caution items for ordinary electronic parts and components.
11.
Delivery Form
11-1 . Carton storage conditions 1) Carton piling-up: Max 8 rows 2) Environments Temperature: 0 40 Humidity: 65% RH or less (at 40 ) There should be no dew condensation even at a low temperature and high humidity. 3)Packing form : As shown in Figure 4. Cartons are weak against damp, and they are apt to be smashed easily due to the compressive pressure applied when piled up. The above environmental conditions of temperature and humidity are set in consideration of reasonable pile-up for storage. 11-2 Packing composition Name Carton size Tray
(The number of Module)
quantity 1 12 575x360x225 Material 8 unit 2 tray mm
Note Electrification prevention polypropylene 80unit/carton
Electrification prevention bag Carton weight (80unit):8kg
Material : Electrification prevention polyethylene
680mm(length)x500mm(depth)x50 (thin)
LCM- 05042 Page 20 of 23 12. Reliability test items No. Test item www..com High temperature storage test 1 Low temperature storage test 2 High temperature 3 & high humidity operation test 4 5 6 7 8 High temperature operation test Low temperature operation test Vibration test (non- operating) Shock test Thermal shock test Conditions Ta = 60 240h Ta = -25 240h Ta = 40 ; 95%RH 240h (No condensation) Ta = 50 240h (The panel temp. must be less than 50 ) Ta = -10 240h Frequency : 10 55Hz/Vibration width (one side) : 1.5mm Sweep time : 1minutes Test period : (2 hours for each direction of X,Y,Z) Direction : X, Y, Z, Time : Third for each direction. Impact value : 100G Action time 6ms Ta=-25 60 /10 cycles (30 min) (30min)
Result Evaluation Criteria Under the display quality test conditions with normal operation state, these shall be no change which may affect practical display function.
13. Display Grade The standard regarding the grade of color LCD displaying modules should be based on the delivery inspection standard.
LCM- 05042 Page 21 of 23 14. Lot No. marking The lot No. www..com will be indicated on individual labels. The location is as shown
Model name indication Label Country display of origin
LQ 043T3DX02
Made in China
Barcode area Code128 StartcodeC 16 figures+checkdigit comment lot No. information barcode No 16 figures
0-0Processing place code
Lot information production year(1 figure)+ production mouth(2 figures)+serial No.(11 figures)
outward form : width 29.0 0.5mm comment column : 1 figure
length11.5
0.5mm
Processing place code
0 1
WSEC Wuxi Factory WSEC Lianyungang Factory 0
2 figure 3 figure 4, 5figure 6 -16figures
Change history administration No. Production year Production month Serial No.
15. Others 1 Disassembling the module can cause permanent damage and you should be strictly avoided. 2 Please be careful that you don't keep the screen displayed fixed pattern image for a long time, since retention may occur. 3 If you pressed down a liquid crystal display screen with your finger and so on, the alignment disorder of liquid crystal will occur. And then It will become display fault. Therefore, Be careful not to touch the screen directly, and to consider not stressing to it.
www..com
www..com
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www..com Suggested applications (if any) are for standard use; See Important Restrictions for limitations on special applications. See Limited Warranty for SHARP's product warranty. The Limited Warranty is in lieu, and exclusive of, all other warranties, express or implied. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED. In no event will SHARP be liable, or in any way responsible, for any incidental or consequential economic or property damage.
NORTH AMERICA
EUROPE
JAPAN
SHARP Microelectronics of the Americas 5700 NW Pacific Rim Blvd. Camas, WA 98607, U.S.A. Phone: (1) 360-834-2500 Fax: (1) 360-834-8903 Fast Info: (1) 800-833-9437 www.sharpsma.com
SHARP Microelectronics Europe Division of Sharp Electronics (Europe) GmbH Sonninstrasse 3 20097 Hamburg, Germany Phone: (49) 40-2376-2286 Fax: (49) 40-2376-2232 www.sharpsme.com
SHARP Corporation Electronic Components & Devices 22-22 Nagaike-cho, Abeno-Ku Osaka 545-8522, Japan Phone: (81) 6-6621-1221 Fax: (81) 6117-725300/6117-725301 www.sharp-world.com
TAIWAN
SINGAPORE
KOREA
SHARP Electronic Components (Taiwan) Corporation 8F-A, No. 16, Sec. 4, Nanking E. Rd. Taipei, Taiwan, Republic of China Phone: (886) 2-2577-7341 Fax: (886) 2-2577-7326/2-2577-7328
SHARP Electronics (Singapore) PTE., Ltd. 438A, Alexandra Road, #05-01/02 Alexandra Technopark, Singapore 119967 Phone: (65) 271-3566 Fax: (65) 271-3855
SHARP Electronic Components (Korea) Corporation RM 501 Geosung B/D, 541 Dohwa-dong, Mapo-ku Seoul 121-701, Korea Phone: (82) 2-711-5813 ~ 8 Fax: (82) 2-711-5819
CHINA
HONG KONG
SHARP Microelectronics of China (Shanghai) Co., Ltd. 28 Xin Jin Qiao Road King Tower 16F Pudong Shanghai, 201206 P.R. China Phone: (86) 21-5854-7710/21-5834-6056 Fax: (86) 21-5854-4340/21-5834-6057 Head Office: No. 360, Bashen Road, Xin Development Bldg. 22 Waigaoqiao Free Trade Zone Shanghai 200131 P.R. China Email: smc@china.global.sharp.co.jp
SHARP-ROXY (Hong Kong) Ltd. 3rd Business Division, 17/F, Admiralty Centre, Tower 1 18 Harcourt Road, Hong Kong Phone: (852) 28229311 Fax: (852) 28660779 www.sharp.com.hk Shenzhen Representative Office: Room 13B1, Tower C, Electronics Science & Technology Building Shen Nan Zhong Road Shenzhen, P.R. China Phone: (86) 755-3273731 Fax: (86) 755-3273735

▲Up To Search▲

Price & Availability of LQ043T3DX02

	To Download LQ043T3DX02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .